GHE AquaFarm Grow System

Here's how to use AquaFarm & WaterFarm:

The reservoir tank's hole is where a grommet will be fitted. The blue reservoir level indicator pipe is connected to an elbow. Once the elbow has been attached, the elbow can be fitted into the grommet. A push-in O clip holds the top of blue reservoir tank indicator pipes in place.After the reservoir tank is filled with the nutrient solution, it is time to place the growing chamber on top. Next, the pumping column can be fitted into the reservoir tank by connecting the air-line to the hole at the top. After the growing chamber has been filled with clay pebbles, the drip-ring and t-piece are attached to the top. An air pump is connected to the other end. The air pump can then be switched on by connecting the other end of the airline to an air pump. The air is forced down the pumping column, where it pushes the nutrient solution up the tube. It is then distributed through the drip-ring and t-piece which water the plant with an even and consistent amount of nutrients.This indicator shows how much nutrient is left in the reservoir. As the plant consumes the nutrient solution, this level will decrease. You should keep an eye on your nutrient solution levels and make sure it doesn't drop below half of its original height. You can add more water to the top of your grow chamber by carefully pouring the nutrient solution or water into it. Every 7 days, we recommend that you change the nutrient solutions. These systems combine both a reliable and affordable hydroponic system. The systems are a good introduction for those who want to learn about hydroponics, but they do not compromise on plant yield or growth as compared with other hydroponic systems.